Ask Us
Do You Have Any Questions?
Please read questions bellow and if you can not find your answer, please send us your question, we will answer you as soon as possible.
F.A.Qs
The filtration for the swimming pool is the most important technical device. When You choose one, it should be rather more powerful, than is the calculation for your swimming pool.
t is always better to use sand filtration for permanent swimming pools. For dismountable pools, up to 5m2 can be used filtrations with cartouches.
The pool water should pass through the filtration at least twice a day and the cycle time should not exceed 4-5 hours. When selecting the filtration, it is, therefore, necessary to take into account the amount of water in the pool and the performance of the filter. It is preferable to slightly oversize the filter station.
The following applies: pool volume / 4 hours = ideal filtration performance
If the dimension calculation is done correctly, filtration should not run longer than 8 hours each day.
It is generally not recommended to use stainless steel for saltwater electrolysis pools because salt electrolysis is very aggressive. It is aggressive not only for stainless steel and all pool technology but also for indoor metal outside the pool. However, if stainless steel has to be used eg. a ladder, we recommend stainless steel marked AISI - 316. However, even stainless steel AISI - 316 "cuts" under some conditions. First, there is spot corrosion and then also surface corrosion. This corrosion is usually the cause of stray currents, ungrounded or grounded ladders, salt deposition on stainless steel, chlorinated water, too low pH, humid environment in combination with chlorine, etc. After removing these problems, it is necessary to regularly treat stainless steel with designated
In order to keep your water beautiful and clean, it is necessary to maintain the pool water chemically. The basic values to be monitored are pH and Cl. The pH value determines the acidity or alkalinity of the water. The ideal pH of the pool water is 7 - 7.2
You can dose tablet form with floating dispensers (floating on water level), or use semi-automatic solutions (feeder with manual regulation on the pipe between the filter and jets). The liquid form is usually dosed by automatic dosing stations or automatic pumps (Which measuring levels of chlorine, pH and others)
The solution is always the same. First of all, you need to start filtration. After that, You need to check pH and set the value between 6,8-7,2. Next step is to over-chlorine pool water with chlorine granulate. Directly after that should follow floccer procedure. You will need to rewash filtration every day. This process has to be repeated until water is clear
I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
You should change sand in the filter when pressure on manometer didn't drop after sand rewash. It proves, that sand in the filter become worn-out and it lost its filtration functionality. It usually happens after 3-5 Years (depending on when it is in indoor or outdoor condition).
Design Your Dream Pool
Home Improvement Pools & Spas